Guide to filling out the certificate


Guidance Notes relating to Part 4 of the Schedule

Part 4.1: In the Schedule 4.1 a single letter indicates the Primary Type of System & Standard/Code of Applicable, this is as indicated below:

Type of System & Standard/Code of Practice Applicable
A Fire Detection and Alarm System: BS 5839 Pt 1 (Buildings)
B Fire Detection and Alarm System: BS 5839 Pt 6 (Dwellings)
C Gaseous Fire Extinguishing System: BS 14520-9 (HFC 227ea extinguishing)
D Gaseous Fire Extinguishing System: BS 14520-15 (IG 541 extinguishing)
E Fire Extinguishing System: BS 5306-4 (Carbon Monoxide)
F Fire Protection for Electronic Data Processing Installations: BS 6266
G Health Technical Memorandum HTM 8

FOOTNOTE
Standards and Codes of Practice referred to in the notes above: “BS” means British Standard, as published by British Standards Institution.

Part 4.2: In the Schedule Part 4.2 a single letter indicates the Primary Type of Signalling used, this is as indicated below:

Type of Signalling
A Audible Only; When only bells or sounders are fitted (i.e. a local audible alarm only)
B Remote; Digital Communicator. Digital communicator to a remote centre
C Remote; Direct or Private Line. Direct or private line to a remote centre
D Remote; RedCARE. RedCARE
E Remote; RedCARE. RedCARE to a remote centre
F Remote; Radio Link. Radio Link to remote centre
G Remote; (Other Remote Signal). Other remote signal (not dual remote signal)
H Not applicable
J Remote; DualCom. Digital communicator plus radio link to a remote centre
K Remore; RedCARE & Radio Link. RedCARE plus radio link to a remote centre
L Remote; RedCARE & DigiCom. RedCARE plus digital communicator to a remote centre
M Remote; (Other Dual Signal). Other dual remote signal


Part 4.3: In this Schedule Part 4.3 a single letter indicates the Type of Premises, this is as indicated below:

Type of Premises
A Retail
F Industrial
B Commercial
G Bank of Financial
C Public Sector
H Institutional
D Licensed
J Hospital
E Domestic
K Sheltered/Warden Controlled Accommodation

Part 4.4: The completed entry indicates that part or all of the system to be certificated was 'NEW' or 'EXISTING'

Part 4.5: A 'YES' indicates that a schedule of variations has been presented.

Note 1: Company details relating to a Registration Number can be obtained from the offices of BAFE or from their website.

Copyright Certsure LLP - All rights reserved. Company number OC379918